- The Hozelock Sensor Controller Plus Watering Timer is a tap mounted watering controller that automatically waters every day at sunrise and sunset. This is the best time to water your garden to minimise water evaporation and leaf scorch
- The Sensor Controller includes a day light sensor that automatically adjusts your watering schedule to start at sunrise and sunset, every day. It adjusts automatically as the seasons change and means you'll never have to reprogramme it
- You can set it so that it waters once or twice per day, either sunrise, sunset or sunrise and sunset
- The schedule may also be adjusted to water everyday, every 2 days, 3 days, 5 days or 7 days
- You can choose the watering duration with a choice of 2, 5, 10, 20, 30 or 60 minutes and the unit is also easy to adjust in case you need to react to changing weather conditions
- If you want to use the water outside of the programmed times, there's a manual water now button which turns the controller on for a choice of 10, 30 or 60 minutes, and this may be cancelled earlier simply by pressing a button
- This automatic watering timer is easy to fit and is supplied with a choice of 21mm (1/2” BSP), 26.5mm (¾” BSP) or 33.3mm (1” BSP) adaptors for connection to most garden taps
- The Sensor Controller Watering Timer also features a Failure Prevention Mode. LED indicator lights will flash red when the batteries need to be replaced
- To check the status of the batteries, simply press the button and the 3 LED lights will illuminate to indicate the strength of the remaining battery life
What you need to know:
- 1 x Hozelock Sensor Controller Plus Watering Timer
- Easy to set up
- Day light sensor automatically adjusts daily watering schedule to coincide with changing time of sunrise and sunset
- Waters once or twice per day, either sunrise, sunset or sunrise and sunset
- Adjustable schedule to water everyday, every 2 days, 3 days, 5 days or 7 days
- Manual water now button for 10, 30 or 60 minutes for watering at any time
- Failure Prevention Mode
- Battery Status
- Easy to Install. Simply insert 2 x AA batteries (not supplied) and select the required watering pattern from the dials. No complex programming
- May be used with garden sprinklers (up to 10 Bar), low pressure micro irrigation watering (1.5 Bar), or water butts (0.1 Bar), due to the unique ball valve component
- Supplied with a choice of 21mm (1/2” BSP), 26.5mm (¾” BSP) or 33.3mm (1” BSP) adaptors for connection to most garden taps